Conference Paper

Effect of ZnO nano materials on grinding surface finishing

Conference Paper

Publication year: 2015

Mathematical Modeling of Material Removal Rate for Ti-5Al-2.5Sn through EDM Process: A Surface Response Method

Conference Paper

Publication year: 2010

Modification and Testing of Four Axes Filament Winding Machine

Conference Paper

Publication year: 2008

Analysis of Connecting Rod Based On Finite Eliment Approach

Conference Paper

Publication year: 2008

Exit Surveys Assessment of Bachelor Mechanical Engineering Programs at Universiti Malaysia Pahang

Conference Paper

Publication year: 2009

Numerical Investigation of Influence of Air and Fuel Dilution for Open Furnace MILD Combustion Burner

Conference Paper

Publication year: 2011

Discretization of Three Dimensional Non-Uniform Grid: Conditional Moment Closure Elliptic Equation Using Finite Difference Method

Conference Paper

Publication year: 2013

Performance of Carbride Cutting Tools When Machining of Nickel Based Alloy

Conference Paper

Publication year: 2010

Development of statistical model to predict Ra and Rz in laser cutting

Conference Paper

Publication year: 2010

Influence Of Engine Speed and Injection Timings on In-cylinder Heat Transfer for Port Injection Hydrogen Fueled Engine

Conference Paper

Publication year: 2010

Prediction of Fatigue Life on Lower Suspension Arm Subjected to Variable Amplitude Loading

Conference Paper

Publication year: 2009

A Review of Minimum Quantity Lubricant on Machining Performance

Conference Paper

Publication year: 2010

Analysis of Auto Car Jack

Conference Paper

Publication year: 2010

Heat Transfer of Intake Port for Hydrogen Fueled Port Injection Engine

Conference Paper

Publication year: 2010

Optimization of Abrasive Waterjet Machining Process Parameters Using Orthogonal Array with Grey Relational Analysis

Conference Paper

Publication year: 2007

Polypropylene Reinforced With Recycle Polyethylene Terephthalate as an Alternative Material for New Plastic Product

Conference Paper

Publication year: 2008

Numerical modeling on homogeneous charge compression ignition combustion engine fueled by diesel-ethanol blends

Conference Paper

Publication year: 2016

The Analysis Of Recirculation Zone And Ignition Position Of Non-Premixed Bluff-Body For Biogas MILD Combustion

Conference Paper

Publication year: 2018

The Effect of Air-Fuel Ratio on Temperature Distribution and Pollutants for Biogas MILD Combustion

Conference Paper

Publication year: 2014

An Investigation into The Effect of Materials on Joining for Automotive Panel Using Tailor Welded Blanks

Conference Paper

Publication year: 2008

Numerical Study of Oxygen Dilution and Temperature Distribution of Biogas Combustion in Bluff-Body MILD Burner

Conference Paper

Publication year: 2013

Study of Random Particle Interactions for Analysis of Diffusion Lengths in Turbulent Combustion Modelling

Conference Paper

Publication year: 2011

Air Fuel Ratio Study For Mixture of Biogas and Hydrogen on Mild Combustion

Conference Paper

Publication year: 2009

Discretization of Three Dimensional Non-Uniform Grid: Conditional Moment Closure Elliptic Equation Using Finite Difference Method

Conference Paper

Publication year: 2013

Effect of Dry Cutting on Force and Tool Life When Machining Aerospace Material

Conference Paper

Publication year: 2010

In-Cylinder Heat Transfer Characteristics of Hydrogen Fueled Engine: A Steady State Approach

Conference Paper

Publication year: 2010

An Evaluation of Profiles for Disk Cams with In-line Roller Followers

Conference Paper

Publication year: 2008

Implementation of Outcome Based Education in the Faculty of Mechanical Engineering, Universiti Malaysia Pahang: An Experience

Conference Paper

Publication year: 2008

M.M.Noor

Blog for Mechanical Engineering Research

Publication Types:

Effect of ZnO nano materials on grinding surface finishing

Mathematical Modeling of Material Removal Rate for Ti-5Al-2.5Sn through EDM Process: A Surface Response Method

Modification and Testing of Four Axes Filament Winding Machine

Analysis of Connecting Rod Based On Finite Eliment Approach

Exit Surveys Assessment of Bachelor Mechanical Engineering Programs at Universiti Malaysia Pahang

Numerical Investigation of Influence of Air and Fuel Dilution for Open Furnace MILD Combustion Burner

Discretization of Three Dimensional Non-Uniform Grid: Conditional Moment Closure Elliptic Equation Using Finite Difference Method

Performance of Carbride Cutting Tools When Machining of Nickel Based Alloy

Development of statistical model to predict Ra and Rz in laser cutting

Influence Of Engine Speed and Injection Timings on In-cylinder Heat Transfer for Port Injection Hydrogen Fueled Engine

Prediction of Fatigue Life on Lower Suspension Arm Subjected to Variable Amplitude Loading

A Review of Minimum Quantity Lubricant on Machining Performance

Analysis of Auto Car Jack

Heat Transfer of Intake Port for Hydrogen Fueled Port Injection Engine

Optimization of Abrasive Waterjet Machining Process Parameters Using Orthogonal Array with Grey Relational Analysis

Polypropylene Reinforced With Recycle Polyethylene Terephthalate as an Alternative Material for New Plastic Product

Numerical modeling on homogeneous charge compression ignition combustion engine fueled by diesel-ethanol blends

The Analysis Of Recirculation Zone And Ignition Position Of Non-Premixed Bluff-Body For Biogas MILD Combustion

The Effect of Air-Fuel Ratio on Temperature Distribution and Pollutants for Biogas MILD Combustion

An Investigation into The Effect of Materials on Joining for Automotive Panel Using Tailor Welded Blanks

Numerical Study of Oxygen Dilution and Temperature Distribution of Biogas Combustion in Bluff-Body MILD Burner

Study of Random Particle Interactions for Analysis of Diffusion Lengths in Turbulent Combustion Modelling

Air Fuel Ratio Study For Mixture of Biogas and Hydrogen on Mild Combustion

Discretization of Three Dimensional Non-Uniform Grid: Conditional Moment Closure Elliptic Equation Using Finite Difference Method

Effect of Dry Cutting on Force and Tool Life When Machining Aerospace Material

In-Cylinder Heat Transfer Characteristics of Hydrogen Fueled Engine: A Steady State Approach

An Evaluation of Profiles for Disk Cams with In-line Roller Followers

Implementation of Outcome Based Education in the Faculty of Mechanical Engineering, Universiti Malaysia Pahang: An Experience