Conference Paper

Development of New Genetic Algorithm Software for Blow Mould Process

Conference Paper

Publication year: 2008

Surface Roughness Prediction Model of 6061-T6 Aluminium Alloy Machining Using Statistical Method

Conference Paper

Publication year: 2009

Quality Management System in Implementation of Outcome Based Education at Faculty of Mechanical Engineering, Universiti Malaysia Pahang

Conference Paper

Publication year: 2008

MILD Combustion: A Technical Review Towards Open Furnace Combustion

Conference Paper

Publication year: 2012

Numerical Investigation of Influence of Air and Fuel Dilution for Open Furnace MILD Combustion Burner

Conference Paper

Publication year: 2012

An Investigation Of Using Palm Biodiesel Blend On The Performance Of A Stationary Marine Diesel Engine

Conference Paper

Publication year: 2016

Preliminary Studies on Number of Coil Turns per Phase and Distance between the Magnet Pairs for AFPM Ironless Electricity Generator

Conference Paper

Publication year: 2016

Prediction Modelling of Power and Torque in End-milling

Conference Paper

Publication year: 2009

Effect of Compressed Natural Gas Mixing on The Engine Performance and Emissions

Conference Paper

Publication year: 2009

Optimization of Surface Roughness in End Milling on Mould Aluminium Alloys (AA6061-T6) Using Response Surface Method and Radian Basis Function Network

Conference Paper

Publication year: 2008

Mechanical behaviour of polymeric foam core at various orientation angles

Conference Paper

Publication year: 2009

Analysis of Surface Roughness for Laser Cutting on Acrylic Sheets using Response Surface Method

Conference Paper

Publication year: 2010

Thermal Analysis of Open-Cycle Regenerator Gasturbine Power-Plants

Conference Paper

Publication year: 2010

Finite Element Prediction of Heat-Affected Zone in Laser-micromachining of Silicon

Conference Paper

Publication year: 2010

Modelling of Non-Premixed Turbulent Combustion of Hydrogen using CMC Method

Conference Paper Scopus Indexed Journal

Publication year: 2012

Implementation of Stochastic Particle Diffusion Length (SPDL) Method to Reacting Jet Flow

Conference Paper New Invention

Publication year: 2012

The Impacts of Moisture content on Performance and emissions of a four-cylinder SI engine running with fusel oil –gasoline blends.

Conference Paper Scopus Indexed Journal

Publication year: 2017

Material Removal Ratein Edm Of Ti-6al-4v)utilizing Copper As Electrode and Negative Polarity of Electrode

Conference Paper

Publication year: 2010

Optimization of Surface Roughness in End Milling Using Potential Support Vector Machine

Conference Paper

Publication year: 2012

Tribological Behaviour Improvement of Lubricant Using Copper (II) Oxide Nanoparticles as Additive

Conference Paper

Publication year: 2016

Prediction modeling of power and torque in end-milling

Conference Paper

Publication year: 2010

The Application of Response Surface Methodology in the Investigation of the Tribological Behavior of Palm Cooking Oil Blended in Engine Oil

Conference Paper

Publication year: 2015

Experimental and Numerical Study of MILD Combustion in an Open-End Furnace with Exhaust Gas Recirculation using Methane and Biogas

Conference Paper

Publication year: 2015

Prediction of Cutting Force by Numerical Solution and Statistic Method in End-Milling Operation

Conference Paper

Publication year: 2009

The Modelling of The Effect Of Air Fuel Ratio on Unburned Hydrocarbons for Mild Combustion

Conference Paper

Publication year: 2012

Implementation of Conditional Moment Closure using the Taylor Expansion and Finite Differences

Conference Paper Scopus Indexed Journal

Publication year: 2011

A Stochastic Micromixing Model based on the Turbulent Diffusion Length Scale

Conference Paper

Andrew P. Wandel

Publication year: 2012

Air Fuel Ratio Study for Mixture of Biogas and Hydrogen on MILD Combustion

Conference Paper

Publication year: 2014

Finite Element Based Fatigue Life Prediction of a New Free Piston Engine Mounting

Conference Paper

Publication year: 2008

Design and Development of Nanoparticles (Nano-lubricant) Test Rigs

Conference Paper

Publication year: 2016

M.M.Noor

Blog for Mechanical Engineering Research

Publication Types:

Development of New Genetic Algorithm Software for Blow Mould Process

Surface Roughness Prediction Model of 6061-T6 Aluminium Alloy Machining Using Statistical Method

Quality Management System in Implementation of Outcome Based Education at Faculty of Mechanical Engineering, Universiti Malaysia Pahang

MILD Combustion: A Technical Review Towards Open Furnace Combustion

Numerical Investigation of Influence of Air and Fuel Dilution for Open Furnace MILD Combustion Burner

An Investigation Of Using Palm Biodiesel Blend On The Performance Of A Stationary Marine Diesel Engine

Preliminary Studies on Number of Coil Turns per Phase and Distance between the Magnet Pairs for AFPM Ironless Electricity Generator

Prediction Modelling of Power and Torque in End-milling

Effect of Compressed Natural Gas Mixing on The Engine Performance and Emissions

Optimization of Surface Roughness in End Milling on Mould Aluminium Alloys (AA6061-T6) Using Response Surface Method and Radian Basis Function Network

Mechanical behaviour of polymeric foam core at various orientation angles

Analysis of Surface Roughness for Laser Cutting on Acrylic Sheets using Response Surface Method

Thermal Analysis of Open-Cycle Regenerator Gasturbine Power-Plants

Finite Element Prediction of Heat-Affected Zone in Laser-micromachining of Silicon

Modelling of Non-Premixed Turbulent Combustion of Hydrogen using CMC Method

Implementation of Stochastic Particle Diffusion Length (SPDL) Method to Reacting Jet Flow

The Impacts of Moisture content on Performance and emissions of a four-cylinder SI engine running with fusel oil –gasoline blends.

Material Removal Ratein Edm Of Ti-6al-4v)utilizing Copper As Electrode and Negative Polarity of Electrode

Optimization of Surface Roughness in End Milling Using Potential Support Vector Machine

Tribological Behaviour Improvement of Lubricant Using Copper (II) Oxide Nanoparticles as Additive

Prediction modeling of power and torque in end-milling

The Application of Response Surface Methodology in the Investigation of the Tribological Behavior of Palm Cooking Oil Blended in Engine Oil

Experimental and Numerical Study of MILD Combustion in an Open-End Furnace with Exhaust Gas Recirculation using Methane and Biogas

Prediction of Cutting Force by Numerical Solution and Statistic Method in End-Milling Operation

The Modelling of The Effect Of Air Fuel Ratio on Unburned Hydrocarbons for Mild Combustion

Implementation of Conditional Moment Closure using the Taylor Expansion and Finite Differences

A Stochastic Micromixing Model based on the Turbulent Diffusion Length Scale

Air Fuel Ratio Study for Mixture of Biogas and Hydrogen on MILD Combustion

Finite Element Based Fatigue Life Prediction of a New Free Piston Engine Mounting

Design and Development of Nanoparticles (Nano-lubricant) Test Rigs